Facilities and Resources


1- Atomic Force Microscopy (AFM)



Nanomechanical analysis of large or multiple samples. Measure stiffness, elasticity, indentation, and adhesion according to various models. Intelligent software autonomously deals with demanding samples.
Accomodates height differences of up to 5 mm and force curves with up to 100 µm in Z. Analysis software for easy comparison of large and complex data sets included.
The Flex-ANA Nanosurf system is an automated solution for AFM-based nanomechanical analysis. It has been designed to investigate the properties of nanomechanical materials for instance scaffolds, cells, hydrogels, polymers, and tissues on large samples using force spectroscopy and force mapping in an automated way.

Nanomechanical analysis of large or multiple samples

The combination of a post-processing workflow and straight-forward experimental, selected hardware elements, and thought-through, well-designed control algorithms are hallmarks of the Flex-ANA system. Measurement locations on large or multiple samples which covers sample area with size 32 mm × 32 mm. Up to 5 mm height differences which can be overcome automatically by the system.


Intelligent software autonomously deals with demanding samples

The smart algorithms during experiment, coordinate the movement of the scan head and the motorized XYZ translation stage (32 mm × 32 mm × 5 mm range), which can optionally be equipped with an additional 100-µm Z piezo for an extended spectroscopy range. The sticky and soft samples with size of several millimeters and micrometer scan be easily treated. 


Software for advanced analysis and comparison of large, complex data sets

The Flex-ANA system gives advanced data post-processing and  analysis capabilities, in addition offers conducting automated nanomechanical measurements.


2- Atomic Absorption




                                               


Varian SpectrAA 220G Graphite Furnace Atomic Absorption Spectrometer. PC-controlled double beam AA spectrometer. The SpectrAA 110/220 optics feature four lamp positions with automated wavelength and slit selection, and high intensity deuterium background correction as standard. Lamps are mounted in fixed positions, and a rotating mirror is used to select the operating lamp, eliminating the need for a conventional turret.  For maximum stability in an automated sequence, a software controlled next-lamp warm up facility is provided.





3- EC 160 CO2 Incubator








The EC 160 is designed to resist contamination and protect the valuable cultures. Fast temperature recovery, without any overshoot continues this substantial protection. Comprehensive N-Smart™ control system which keeps the user fully informed with display of set and actual parameter values. Should any alarm situation occur, a variety of alerts can be invoked. In addition optional AlerText™ will send a text message to you anywhere in the world and could include the NÜVE service support for fast response.Wet disinfection by NüveDis™ ensures a clean chamber.

Chamber Volume: 160 liters.

Temperature range: Ambient Temperature +7°C to 50°C.

Temperature variation / fluctuation: ± 0,3°C / ± 0,1°C at 37°C.

Programmable temperature alarm range: ± 0,5°C to 5°C.


 Its features 
• Infra-Red CO2 level control permitting frequent Access. N-Smart™ control system to optimize parameters.
• Maximum information with highly visible 4,3’’ colourfulLCD display. Simultaneous display of set and actual  
   values. Seamless stainless steel chamber with rounded corners.
• Clean chamber without any sensor inside.
• NuveDis™ 90°C wet disinfection system. Massive data storage with NuveTrack™ which stores the records up  
   to ten years with one hour intervals as digitally and graphically.
 USB port for data storage and PC.
Ethernet port for remote access through internet.
• Possibility of sending e-mails in case of any failure.
• Optional NuveCloser™ software to access the operating parameters, failure history, memory and other  
    technical parameters.
• Auto Zero for permanent accurate control.
 Optional NuveWarn™ remote alarm system.
• Built-in 2nd  stage gas regulator.




4- MN 090/120 Microbiological Safety Cabinets




MN Series Class II Microbiological Safety Cabinets are the instrument of choice when handling hazardous microorganisms or those whose hazard level is unknown. Airflow is automatically maintained at 0,45 m/s by compensating for filter clogging. 


 Its features 

         Two models with different working table widths: MN 090: 89 cmandMN 120: 119 cm.

• First class protection for operator, environment and product. Microprocessor control system with digital display for air flow speed.
• Two HEPA filters with 99,999 % efficiency for particles ≥ 0,3 μm.
• Automatic speed compensation system against clogged filter.
• Recirculated HEPA filtered air to prolong the lifetime of HEPA filters.
• Mains power switch with key lock.
• Alarms for: Power failure, control system failure, open window, low and high air flow speed, clogged filters.
• Perfect air tightness of window seal by means of gas spring assisted window. Comfort of usage with very quiet blower and high light intensity. Smooth chamber walls and rounded corners without soldering for easy cleaning and decontamination.
• Stainless steel and removable 3 pcs. 
• Of power socket as standard. Optional front enclosure with UV light, support stand, gas and vacuum valve.
• EN 12469 Certificate for MN 120 (TÜV GS Certified).



5- MegaCycler



Theall-new MegaCycler™ has the innovative features of the Edvo Cycler™ but nearly twice the sample capacity with its 49-place block.



 Its features 


• Easy to use!

• Holds 49 x 0.2 ml PCR Samples

• Heated Oil-Free Lid with Magnetic Latch

• Pre-Programmed EdvotekPCR Protocols

• Vivid 7-line LCD Display with Live Program Information

• Standalone Machine - No PC Required!

• Compact Footprint for Convenient Storage

• Temperature Range: 4ºC  to 99ºC

• Maximum Ramp Rate: 3ºC/sec

• Dimensions: 16 x 8.5 x 7”

• Made in USAFor49 Samples



6- LABORATORY INCUBATOR (IB-9052A)


          



Its features 

  • Microprocessor control.
  • Digital display setting and actual temperature.
  • Over temperature alarm, PID self-tuning.
  • Digital display running timer.
  • Stainless steel interior.
  • Electricity leakage protection.
  • With glass inner door, With hidden door locks.
  • Mechanical overheat protection, cut off the heating sources.
  • Automatic alarm after operation.
  • Suitable for constant temperature tests.
  • Suitable for bacteria cultivation, breeding, ferment.

7- Series E Classic.Line|Drying and heating chambers with mechanical adjustment




With a BINDER E series heating oven, you obtain a reliable and powerful unit in a solid configuration at a very attractive price. This heating oven is preferred for tasks in basic research, as well as in human and veterinary medicine.


Its features


• Temperature range: 60 °C to 230 °C.
• Adjustable exhaust air flap.
• Hydro-mechanical thermostat.
• Class1 temperature limitation device (Model E028-230V-T)Timer 0 – 120 min.
• chrome-plate dracks.






Comments